| |
 LS-21A
Two-Shaft Slicer |
|
| > |
Application¡G |
| |
PVC¡APET¡AOPP¡AMasking¡APaper¡AFilament¡ADouble-Coated Tapes. |
| > |
Special Features¡G |
| |
- PLC Program control system.
- Knife is free rotation.
- Slit dimension controlled by
servo motor, set unit¡G0.1mm.
- Knife angle is manual adjustable.
- Optional support system used
in small shaft.
- Cooling & cooling recovery
system.
- Equipped with safety cover &
e-stop device.
|
|
|
 |
| LS-22A
Auto 2-Shaft Slicer |
|
| > |
Application¡G |
| |
OPP, PVC, PET, Masking, Foam, Cloth,
Double-Coated, Filament, Glass Cloth,
Duct, Cellophane tapes. |
| > |
Special Features¡G |
| |
- PLC Program control system.
- 7 Kinds knife angle pre-setting,
which is auto adjustable by servo
motor.
- Knife feeding is controlled by
air-oil cylinder.
- 20 Different memories of knife
angle & slit width parameters.
- 4 Programmable sizes for each
log set by servo motor, set unit:0.1mm.
- Multi-stage setting of cutting
Q¡¦ty.
- Knife driven, free, fixed by
reducer motor/clutch/brake.
- Turret is driven by reducer motor
for heavy load.
- Touch screen can display operating
manual, failure settlement, set
operating conditions, ¡Ketc.
- Cooling & cooling recovery
system.
- Equipped with safety cover &
e-stop device.
|
|
|
|
| LS-400S
Shaftless cutter (4-Spindle) |
|
|
| > |
Application¡G |
| |
Various types of tapes. |
| > |
Special Features¡G |
| |
- Simultaneous cutting 4 swords
(Or circular blades) on 4 log rolls.
- 20 Different memories of slit
width parameters.
- Auto knife angle adjustment (Can
be manual adjusted separately).
- Multi-Stage setting of cutting
Q¡¦ty.
- Tapes are discharged after each
cutting, so they do not stick to
each other.
- Products & both edges of adhesive
roll are discharged in different
directions.
- Touch screen can display operating
manual, failure settlement, set
operating conditions, ¡Ketc.
- Log roll feeding by robot arms
(4 spindle).
- Inverter motor control for log
roll rotary.
- Servo motor control for cutting
size set.
- Auto knife adjusting device for
1st/last three cutting.
- Auto log roll loader.
|
|
|
|
| LS-800S
8 Log Roll Simultaneous Cutting Function |
 |
| > |
Application¡G |
| |
Various types of tapes. |
| > |
Special Features¡G |
| |
- High Quality¡I
- Blade-angle adjusted
automatically by program
setting, the waste material
reducing and convex solution
should get answer.
- Cutter feeding rate
has various stage program
setting to maintain cutting
quality.
- High Efficiency¡I
- Separator distribute
finish products from waste
material by different
conveyor belt. Can connect
with an auto packing equipment
to be an automation system.
- Log rolls auto deeding
by carriage, and supply
eight log rolls at the
same time.
- High Productivity¡I
- Simultaneous cutting
function of eight log
roll.
- Knife carrier was driven
by servo motor which had
more quickly and precisely
moving control.
- For sorts of tapes.
- Eight cutters cut eight
log rolls simultaneously.
- Log rolls auto feeding by
carriage.
- Blade-angle changed automatically
by program setting.
- For different factors of
production, 20 sets parameter
setting capacity.
- Available for various cutting
size of same log roll.
- Cutter feeding rate has
various stage program setting.
- Separator distribute finish
products from waste material
by different conveyor belt.
- Auto-Alarm system connected
with human-machine interface.
|
|
| > |
Human Machine Interface System¡G |
| |
Human-machine interface system submitted
most easy way to operate by program
for all kinds of products, such as four
different cutting size at same log roll,
four step cutter feeding depth and seven
adjustable position of blade-angle.
And it can offer 20 sets parameter setting
capacity.
Auto-alarm system also connect with
human-machine interface which show any
abnormal stop or interruption immediately. |
|
|
|
|
Slicer
/ Shaftless 
